Drag Specialties
- Brakes
- Cables
- Covers, Security & General
- Dashes & Gauges
- Electrical
- Engine
- Exhaust
- Footrests & License Plate Frames
- Frames, Suspension & Fenders
- Chassis Kits
- Covers & Side Panels
- Dampers, Bushings, Stops, Plugs, Covers & Caps
- Fender Adapters and Relocation Kits
- Fender Spacers & Mounting Blocks
- Fender Struts, Supports & Accents
- Filler Panels, Frame Inserts & Covers
- Fork Assemblies, Legs, Skins, Accents & Plugs
- Fork Braces & Trusses & Stabilizers
- Fork Tubes
- Frame Kits, Gas Tanks & Swingarms
- Front Fenders
- Front Forks
- Kickstands, Center Stands & Hardware
- Lower Fillers
- Lowering & Fork Kits
- Neck Post Bearings & Fork & Steering Stops
- Rear Fenders
- Rear Tire Kits
- Rock Guards & Fender Struts
- Shock Absorbers & Suspension & Compressor Kits
- Shock Covers, Studs & Mounting Kits
- Stabilizers & Touring Links
- Stem Caps, Washers, Plugs, Covers & Bolts
- Suspension Kits & Fork Springs & Tuners
- Suspension Systems & Gauges
- Swingarm Retrofits & Hardware
- Swingarm Spacers & Pivot Bolt Kits & Covers
- Tins, Boot Covers, Bellows, Baffles & Guards
- Top & Triple Trees & Conversion Kits
- Wide Drive, Fender & Tire Kits
- Fuel/Air Systems
- Gaskets & Seals
- Handlebars, Controls & Mirrors
- Hardware, Chemicals & Tools
- Lighting
- Luggage
- Seats & Sissy Bars
- Tanks & Oil Filters
- Tires, Tubes & Wheels
- Touring
- Transmission & Driveline
- Windshields
Frames, Suspension & Fenders > Front Forks >
TAPERED LEG WIDE SPRINGER FRONT FORKS
Features
- Feature a tapered leg design like that found on the new-style OEM springer
- Springer forks come in seven lengths and do not have a shock or fender mounts
- The 42”, 45” and 48” springers have a built-in 3° rake so you have less front-end flop
- Each fork includes an axle, axle spacers, top nut, crown nut, top triple tree (for stock-style handlebar risers) and brake caliper anchor
- Made in the U.S.A.
Images
1809-2613
FOR 48-84 FL/FX (EXCEPT 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL AND MOST CUSTOM FRAMES THAT USE A 1” NECK BEARING
| Part Number | Description | Suggested Retail |
|---|---|---|
| 1809-2610 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 27” springer | $2,058.95 |
| 1809-2612 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 33” springer | $2,176.95 |
| 1809-2613 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 36” springer | $2,234.95 |
| 1809-2614 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 39” springer | $2,293.95 |
| 1809-2615 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 42” springer with 3° rake | $2,352.95 |
| 1809-2616 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 45” springer with 3° rake | $2,411.95 |
| 1809-2617 | FITS: 48-84 FL/FX (Except 80-84 FLT), 84-09 FXST/FLST, 84-94 FXR, 78-03 XL And Most Custom Frames That Use A 1” Neck Bearing, SIZE: 48” springer with 3° rake | $2,469.95 |
Descriptions and notes
Overall length is measured from the top of the top clamp to the center of the rear leg pivot.
This item appears on page 978 of the Fatbook