Engine > Wild Things Camshafts >

WILD THINGS GEAR DRIVEN CAMS FOR 99-06 TWIN CAM

Kuryakyn logo

Features

  • Low cam noise and long valve train life
  • Designed to give strong low-end torque and high horsepower with a wide, usable power band and extended rpm ranges
  • Sold in sets of two
  • Gear-driven cams require the use of 4-gear gear set (DS-199532 or DS-199538) and a high lift spring kit (both sold separately)
  • Cam installation kit recommended for gear-driven cams (kit #DS-199321)
  • Bolt-in low- and mid-range power increases; 80+ horsepower possible with no head work
  • Recommended for heavy bikes with stock or near stock compression
  • Works best in 88” to 95” motors
  • Power gains through the entire rpm range
  • Big power for 88” to 103” motors; best for use with motors that have head work, larger carb or throttle body and a performance exhaust system
  • Can be used in stock motors
  • A high horsepower, high torque cruiser cam for 103”+ motors
  • High compression, head work, large carburetor or throttle body and a performance exhaust will get the most out of this cam
  • Excellent choice for engines with restricted intake tracts or those with Magneti Marelli fuel-injection systems
  • High-lift version of our TC-2G cams, very street-friendly
  • When combined with Wild Things heads, pistons and throttle body, more than 120 horsepower can be produced
  • Requires clearancing
  • High-lift version of the TC-4G
  • For 95”+ motors
  • Impressive power gains and a wide powerband
  • High compression, head work, large carburetor or throttle body and a performance exhaust will get the most out of this cam
  • Require some clearancing
  • For 100”+ engines
  • Large powerband with good drivability yet it runs quiet
  • Really helps when starting high-compression, big-inch motors
  • Requires clearancing

Images

WILD THINGS GEAR DRIVEN CAMS FOR 99-06 TWIN CAM

0925-0099

  • 0925-0099


Part Number Description Suggested Retail
0925-0100  TC-1G gear driven cams   $349.95 
0925-0101  TC-2G gear driven cams   $349.95 
0925-0099  TC-4G gear driven cams   $349.95 
0925-0103  TC-5G gear driven cams   $349.95 
0925-0104  TC-26G gear driven cams   $349.95 
0925-0102  TC-46G gear driven cams   $349.95 
0925-0105  TC-546G gear driven cams   $349.95 

Descriptions and notes

Except 06 Dyna Glide.

The TC-4G and TC-46G cams are specifically designed to allow you to use the stock starter in larger than stock motors; and they help eliminate detonation (pinging) when running up to 10.5 compression if 92-octane fuel is used.

This item appears on page 402 of the Fatbook