Drag Specialties
- Apparel & Helmets
- Brakes
- Cables
- Covers, Security & General
- Dashes & Gauges
- Electrical
- Engine
- Andrews Camshafts
- Breather Valves, Ramps & Vent Filters
- Cam Covers
- Cam Gears, Bearings Plates & Fasteners
- Cam Installers, Bearings, Bearings & Washers
- Camshafts
- Crane Cams Camshafts
- Cylinder Heads
- Cylinders
- Engine Cases & Cylinders
- Engines & Engine Kits
- Flywheels, Bushings, Wrist Pins & Crankpins
- Gears, Spacers, Valves & Breaker Shafts
- Headbolt & Timing Covers
- Headbolt Covers
- Heads, Manifolds & Cams
- Ignition Housings & Motor Mounts
- Lifter & Tappet Block Covers
- Lifters, Rollers & Adjusting Screws
- Motor Mounts, Plates & Covers
- Motor Mounts, Stabilizers, Covers & Brackets
- Nuts, Seals, Bearings & Bushings
- Oil Pump Repair Kits & Covers
- Oil Pumps & Components
- Piston Kits, Rings & Clips
- Pistons
- Pistons, Compression Kits, Valves & Releases
- Points Covers
- Pushrod Tubes & Covers
- Pushrods
- Races, Bearings, Retainers & Shafts
- Rocker Arms
- Rocker Covers & Boxes
- Rocker Covers & Cam Covers
- Rocker Shafts, Plugs & Pushrods
- Tappet Block Kits & Oiling Kits
- Tappet Guides & Lifter Blocks
- Tappets
- Valve Collars, Shims & Keys
- Valve Guides
- Valve Springs
- Valves
- Wild Things Camshafts
- Exhaust
- Footrests & License Plate Frames
- Frames, Suspension & Fenders
- Fuel/Air Systems
- Gaskets & Seals
- Handlebars, Controls & Mirrors
- Hardware, Chemicals & Tools
- Lighting
- Luggage
- Seats & Sissy Bars
- Tanks & Oil Filters
- Tires, Tubes & Wheels
- Touring
- Transmission & Driveline
- Windshields
Engine > Crane Cams Camshafts >
CHAIN DRIVE PERFORMANCE CAMS
Features
- Crane cam dyno-proven cams for Twin Cam 88 applications
- Hydraulic cams are computer-designed so cam profile accurately delivers consistent performance
- Cams use splined cam sprockets standard on 00-06 models (except 06 Dyna); 99 models will need to replace the stock cam keyed-style sprocket with the splined 00-06 cam sprocket (OEM #25446-99)
- All cams for 06 Dyna and all 07-08 models require the use of 99-04 style valves, seals, valve guides and spring kits
- Great mid-range and upper end power
- Works great with stock up to 95 cubic inch kits
- Provides optimum power with 9.5 compression ratio and modified heads
- Must use Crane valve springs, set up for .570” lift, performance air cleaner and exhaust
- Power range from 1800 to 5800 rpm
- For heavily modified engines with a compression ratio of 10.25:1 and up, big bore kit and headwork
- Performance air cleaner and performance exhaust also required
- Designed for use with Edelbrock Performer RPM Twin Cam cylinder heads
- .620” lift, range: 2000 to 6000 rpm
- Bolt-in camshaft; great low-end and mid-range power
- Works well in heavier bikes with performance air cleaner, exhaust and stock compression ratio
- Can be used with stock valve springs
- Power range from idle to 5000 rpm
- Strong mid-range torque with great upper end power
- Best for modified engines with 10.5 compression ratio, big bore kits and modified heads
- Must use Crane valve springs, set up for .700” travel, performance air cleaner and exhaust
- Power range from 2000 to 6200 rpm
- Bolt-in camshaft; good low end and mid-range power
- Great for Dynas, Softails and solo riders
- Works best with performance air cleaner, exhaust and compression ratio from stock to 9.5:1
- Can be used with stock valve springs
- Power range from 1500 to 5000 rpm
- Bolt-in camshaft; 10.1 compression ratio recommended
- Works best with performance air cleaner and exhaust
- Can use stock valve springs
- Power range from 1800 to 5800 rpm
Images
290-2 Hot Street Performance
| Part Number | Description | Suggested Retail |
|---|---|---|
| 0925-0123 | For 06 Dyna Glide and 07-08 Twin Cam | $295.95 |
| DS-199263 | For 99-06 Twin Cam (except 06 Dyna Glide) | $308.95 |
| 0925-0007 | For 99-06 Twin Cam (except 06 Dyna Glide) - w/Lifters | $431.95 |
296-2 Hot Street
| Part Number | Description | Suggested Retail |
|---|---|---|
| 0925-0125 | For 06 Dyna Glide and 07-08 Twin Cam | $295.95 |
300-2 Mild Street, Cruising/Touring
| Part Number | Description | Suggested Retail |
|---|---|---|
| 0925-0120 | For 06 Dyna and 07-08 Twin Cam | $295.95 |
| 0925-0004 | For 99-06 Twin Cam (except 06 Dyna Glide) - w/Lifters | $431.95 |
304-2 Max Hot Street
| Part Number | Description | Suggested Retail |
|---|---|---|
| 0925-0124 | For 06 Dyna Glide and 07-08 Twin Cam | $295.95 |
| DS-199264 | For 99-06 Twin Cam (except 06 Dyna Glide) | $308.95 |
| 0925-0008 | For 99-06 Twin Cam (except 06 Dyna Glide) - w/Lifters | $431.95 |
310-2 Moderate Street, Cruising
| Part Number | Description | Suggested Retail |
|---|---|---|
| 0925-0121 | For 06 Dyna and 07-08 Twin Cam | $295.95 |
| DS-199261 | For 99-06 Twin Cam (except 06 Dyna Glide) | $308.95 |
| 0925-0005 | For 99-06 Twin Cam (except 06 Dyna Glide) - w/Lifters | $431.95 |
316-2 Street Performance
| Part Number | Description | Suggested Retail |
|---|---|---|
| 0925-0122 | For 06 Dyna Glide and 07-08 Twin Cam | $295.95 |
| DS-199262 | For 99-06 Twin Cam (except 06 Dyna Glide) | $308.95 |
| 0925-0006 | For 99-06 Twin Cam (except 06 Dyna Glide) - w/Lifters | $431.95 |
Descriptions and notes
Must check coil bind, valve to valve clearance and valve to piston clearance.
This item appears on page 398 of the Fatbook