Drag Specialties :: Electrical > Ignition Kits

PROFIRE™ SOFTWARE

Used to program the V-Thunder Controller PART #s DS-242443, DS-242444 and Hyperfyre™ DS-242441 ignition modules
ProFire requires Windows® 3.x/95/98/NT compatible program for changing and modifying the ignition map and other programs residing in the Troller and Hyperfyre ignition computer
To use ProFire software, you will need a laptop or desktop PC, Windows 95 or newer, RS232 serial port, a minimum of 4 megs of RAM and a 3.5” disk drive (minimum recommended CPU speed: 25 Mhz)
With the use of a 7-pin or 8-pin power adapter cord (must be purchased separately) you can remove the Controller or Hyperfyre module from the bike and connect it directly to the computer (requires a 9V battery)
Settings that can be changed with the ProFire software are: basic module settings, ignition delay, start mode exit, start mode enter, cam sensor sinc, cam sensor offset, rev limit, aux rev limit, rev limit rate, nitrous delay, nitrous arming rpm, ignition mode, switch lockout, serial port setting and collars
Software kit includes one 3.5” floppy disk, one 7’ interface cable and one programming manual
Made in the U.S.A.

DS-242442

This item appears on page 555 of the Fatbook