Drag Specialties
- Brakes
- Cables
- Covers, Security & General
- Dashes & Gauges
- Electrical
- Engine
- Assembled Heads, Intake Manifolds & Cams
- Cam Bearings, Bushings, Shims, Washers & Plates
- Cam, Gear & Timing Covers
- Cams & Conversion Camshafts
- Cast-Iron Guides
- Chain Driven Cams & Camshaft Kits
- Cylinder Heads
- Cylinders
- Engine Cases & Cylinders
- Engine Packages & Motors
- Flywheels, Crankpins & Connecting Rods
- Gear Driven Cams
- Gear Sets, Plates & Fastener Kits
- Gears, Breathers, Spacers & Shaft Kits
- Lifter & Tappet Block Covers
- Lifters, Rollers & Lock Nuts
- Motor Mounts, Stabilizers, Coil Covers & Brackets
- Nuts, Seals, Bearings, Bushings, Keys & Washers
- Oil Pump Components
- Oil Pump Covers & Repair Kits
- Oil Pumps & Cam Covers
- Oiling Kits, Tappet Block Kits & Assemblies
- Piston Rings & Clips
- Pistons
- Points & Head Bolt Covers
- Pushrod Tubes, Covers & Assemblies
- Pushrods, Plugs, Nuts & Shaft Adjuster Kits
- Release Valves, Caps & Kits & Pistons
- Rocker Arms, Shafts & Shims
- Rockers Covers & Boxes
- Rod Roller Bearings, Race Sets & Sprocket Shafts
- Tappet Guides & Lifter & Tappet Blocks
- Tappets
- Top End Kits & Power Packages
- Valve Guides & Seals
- Valve Spring Retainers, Collars & Valve Keys
- Valve Stem Seals & Seats
- Valve Train & Spring Kits
- Valves
- Vent Filters, Oil Screens & Breather Gears
- Exhaust
- Footrests & License Plate Frames
- Frames, Suspension & Fenders
- Fuel/Air Systems
- Gaskets & Seals
- Handlebars, Controls & Mirrors
- Hardware, Chemicals & Tools
- Lighting
- Luggage
- Seats & Sissy Bars
- Tanks & Oil Filters
- Tires, Tubes & Wheels
- Touring
- Transmission & Driveline
- Windshields
Engine > Cams & Conversion Camshafts >
CAMS FOR 84-99 80” EVOLUTION MOTORS
Features
- Feature an improved ramp design for longevity and quiet operation
- All cams include new inner cam bearing (Torrington) and gear
- Made in the U.S.A.
- Bolt-in cam for 80” motors
- Use of a free-flowing air cleaner and exhaust is recommended
- Works well from 2000 to 6000 rpm
- For use in 89-103” motors
- Requires performance valve springs, high-flowing heads and exhaust
- Works best from 3000 to 6000 rpm
- For use in 96-120” motors
- Requires high-compression, free-flowing motor
- Requires performance valve springs
- Generates best power from 2800 to 6000 rpm
- For use in 100”+ motors
- This cam requires major head and piston modifications
- Requires performance valve springs
- Use for street and strip
Images
| Part Number | Description | Suggested Retail |
|---|---|---|
| 2007-2105 | FITS: 84-99 80” EVOLUTION MOTORS, STYLE: 1361G CAM, INTAKE OPENING: 16”, EXHAUST OPENING: 50”, INTAKE CLOSING: 38”, EXHAUST CLOSING: 14”, INTAKE DURATION @ .053: 234°, EXHAUST DURATION @ .053: 244°, INTAKE VALVE LIFT: .500”, EXHAUST VALVE LIFT: .500” - 1361G cam | $240.95 |
| 2007-2107 | FITS: 84-99 80” EVOLUTION MOTORS, STYLE: 1362G CAM, INTAKE OPENING: 24”, EXHAUST OPENING: 56”, INTAKE CLOSING: 50”, EXHAUST CLOSING: 22”, INTAKE DURATION @ .053: 254°, EXHAUST DURATION @ .053: 258°, INTAKE VALVE LIFT: .565”, EXHAUST VALVE LIFT: .565” - 1362G cam | $240.95 |
| 2007-2109 | FITS: 84-99 80” EVOLUTION MOTORS, STYLE: 1363G CAM, INTAKE OPENING: 28”, EXHAUST OPENING: 68”, INTAKE CLOSING: 56”, EXHAUST CLOSING: 24”, INTAKE DURATION @ .053: 264°, EXHAUST DURATION @ .053: 272°, INTAKE VALVE LIFT: .660”, EXHAUST VALVE LIFT: .660” - 1363G cam | $240.95 |
| 2007-2111 | FITS: 84-99 80” EVOLUTION MOTORS, STYLE: 1364G CAM, INTAKE OPENING: 31”, EXHAUST OPENING: 72”, INTAKE CLOSING: 59”, EXHAUST CLOSING: 24”, INTAKE DURATION @ .053: 270°, EXHAUST DURATION @ .053: 276°, INTAKE VALVE LIFT: .660”, EXHAUST VALVE LIFT: .660” - 1364G cam | $240.95 |
This item appears on page 449 of the Fatbook