Drag Specialties
- Brakes
- Cables
- Covers, Security & General
- Dashes & Gauges
- Electrical
- Engine
- Assembled Heads, Intake Manifolds & Cams
- Cam Bearings, Bushings, Shims, Washers & Plates
- Cam, Gear & Timing Covers
- Cams & Conversion Camshafts
- Cast-Iron Guides
- Chain Driven Cams & Camshaft Kits
- Cylinder Heads
- Cylinders
- Engine Cases & Cylinders
- Engine Packages & Motors
- Flywheels, Crankpins & Connecting Rods
- Gear Driven Cams
- Gear Sets, Plates & Fastener Kits
- Gears, Breathers, Spacers & Shaft Kits
- Lifter & Tappet Block Covers
- Lifters, Rollers & Lock Nuts
- Motor Mounts, Stabilizers, Coil Covers & Brackets
- Nuts, Seals, Bearings, Bushings, Keys & Washers
- Oil Pump Components
- Oil Pump Covers & Repair Kits
- Oil Pumps & Cam Covers
- Oiling Kits, Tappet Block Kits & Assemblies
- Piston Rings & Clips
- Pistons
- Points & Head Bolt Covers
- Pushrod Tubes, Covers & Assemblies
- Pushrods, Plugs, Nuts & Shaft Adjuster Kits
- Release Valves, Caps & Kits & Pistons
- Rocker Arms, Shafts & Shims
- Rockers Covers & Boxes
- Rod Roller Bearings, Race Sets & Sprocket Shafts
- Tappet Guides & Lifter & Tappet Blocks
- Tappets
- Top End Kits & Power Packages
- Valve Guides & Seals
- Valve Spring Retainers, Collars & Valve Keys
- Valve Stem Seals & Seats
- Valve Train & Spring Kits
- Valves
- Vent Filters, Oil Screens & Breather Gears
- Exhaust
- Footrests & License Plate Frames
- Frames, Suspension & Fenders
- Fuel/Air Systems
- Gaskets & Seals
- Handlebars, Controls & Mirrors
- Hardware, Chemicals & Tools
- Lighting
- Luggage
- Seats & Sissy Bars
- Tanks & Oil Filters
- Tires, Tubes & Wheels
- Touring
- Transmission & Driveline
- Windshields
Engine > Valve Train & Spring Kits >
VALVE SPRING SETS
Features
- Incorporate an interference doublespring design with a damper to control harmonics
- Engineered for maximum performance in severe applications such as high compression and big-inch street motors
- .600” spring sets are 1.460” o.d. and have a pressure of 125 lb. when closed and 275 lb. at .500” lift; installed height should be 1.800”; coil bind occurs at 1.150”
- .675” spring sets are 1.510” o.d. and have a pressure of 184 lb. when closed and 422 lb. at .570” lift; installed height should be 1.850”; coil bind occurs at 1.080”
- Sold in a set of four springs (enough for one engine)
- Made in the U.S.A.
Images
FOR 84-04 BIG TWIN
| Part Number | Description | Suggested Retail |
|---|---|---|
| DS-199547 | FITS: 84-04 BIG TWIN - .600” spring set | $64.95 |
| DS-199550 | FITS: 84-04 BIG TWIN - .675” spring set | $77.95 |
This item appears on page 421 of the Fatbook