Drag Specialties
- Brakes
- Cables
- Covers, Security & General
- Dashes & Gauges
- Electrical
- Engine
- Assembled Heads, Intake Manifolds & Cams
- Cam Bearings, Bushings, Shims, Washers & Plates
- Cam, Gear & Timing Covers
- Cams & Conversion Camshafts
- Cast-Iron Guides
- Chain Driven Cams & Camshaft Kits
- Cylinder Heads
- Cylinders
- Engine Cases & Cylinders
- Engine Packages & Motors
- Flywheels, Crankpins & Connecting Rods
- Gear Driven Cams
- Gear Sets, Plates & Fastener Kits
- Gears, Breathers, Spacers & Shaft Kits
- Lifter & Tappet Block Covers
- Lifters, Rollers & Lock Nuts
- Motor Mounts, Stabilizers, Coil Covers & Brackets
- Nuts, Seals, Bearings, Bushings, Keys & Washers
- Oil Pump Components
- Oil Pump Covers & Repair Kits
- Oil Pumps & Cam Covers
- Oiling Kits, Tappet Block Kits & Assemblies
- Piston Rings & Clips
- Pistons
- Points & Head Bolt Covers
- Pushrod Tubes, Covers & Assemblies
- Pushrods, Plugs, Nuts & Shaft Adjuster Kits
- Release Valves, Caps & Kits & Pistons
- Rocker Arms, Shafts & Shims
- Rockers Covers & Boxes
- Rod Roller Bearings, Race Sets & Sprocket Shafts
- Tappet Guides & Lifter & Tappet Blocks
- Tappets
- Top End Kits & Power Packages
- Valve Guides & Seals
- Valve Spring Retainers, Collars & Valve Keys
- Valve Stem Seals & Seats
- Valve Train & Spring Kits
- Valves
- Vent Filters, Oil Screens & Breather Gears
- Exhaust
- Footrests & License Plate Frames
- Frames, Suspension & Fenders
- Fuel/Air Systems
- Gaskets & Seals
- Handlebars, Controls & Mirrors
- Hardware, Chemicals & Tools
- Lighting
- Luggage
- Seats & Sissy Bars
- Tanks & Oil Filters
- Tires, Tubes & Wheels
- Touring
- Transmission & Driveline
- Windshields
Engine > Assembled Heads, Intake Manifolds & Cams >
PERFORMER INTAKE MANIFOLDS FOR BIG TWIN
Features
- Specifically designed to match Edelbrock cylinder heads
- Must be used with Edelbrock head kits to optimize the flow of the heads and obtain optimum results
- Use a unique rectangular .125” raised runner configuration
- Each intake comes with intake seals, bolts, carburetor flange gaskets or spigot grommet and vacuum fittings (if needed)
Images
DS-289220
THREE-PIECE MANIFOLDS FOR 99-06 TWIN CAM MODELS
| Part Number | Description | Suggested Retail |
|---|---|---|
| DS-289262 | FITS: 99-06 Twin Cam Models, STYLE: Spigot manifold, stock width - Three-Piece Manifolds | $108.95 |
| DS-289264 | FITS: 99-06 Twin Cam Models, STYLE: Spigot manifold for Mikuni HSR42/45 carb, stock width - Three-Piece Manifolds | $108.95 |
| 1010-0080 | FITS: 99-06 Twin Cam Models, STYLE: Flange manifold for Edelbrock or S&S E series carb - Three-Piece Manifolds | $104.95 |
| 1010-0081 | FITS: 99-06 Twin Cam Models, STYLE: Flange manifold for S&S G or Mikuni HSR 48mm carb - Three-Piece Manifolds | $104.95 |
THREE-PIECE MANIFOLDS FOR BIG TWIN EVOLUTION MODELS
| Part Number | Description | Suggested Retail |
|---|---|---|
| 2114-3001 | FITS: Big Twin Evolution Models, STYLE: Spigot manifold, polished - Three-Piece Manifolds | $172.95 |
| 2114-3002 | FITS: Big Twin Evolution Models, STYLE: Flange manifold, polished - Three-Piece Manifolds | $165.95 |
| DS-289220 | FITS: Big Twin Evolution Models, STYLE: Spigot manifold, stock width - Three-Piece Manifolds | $110.95 |
| DS-289221 | FITS: Big Twin Evolution Models, STYLE: Flange manifold, stock width - Three-Piece Manifolds | $104.95 |
| DS-289224 | FITS: Big Twin Evolution Models, STYLE: Flange manifold for S&S “G” series carb or Mikuni HSR 48MM carb stock width - Three-Piece Manifolds | $104.95 |
REPLACEMENT COMPONENTS
| Part Number | Description | Suggested Retail |
|---|---|---|
| DS-289206 | FITS: Edelbrock Intake Manifolds, QTY: Pair - Repl. intake manifold gaskets for one-piece manifolds | $5.95 |
| DS-289222 | FITS: Edelbrock Intake Manifolds - Repl. seals for three-piece manifolds | $10.95 |
This item appears on page 414 of the Fatbook