Drag Specialties :: Frames, Suspension & Fenders > Frames

XL RIGID FRAMES

Available in three styles for use with 86-03 XL motors
PART #2406-2610 has 0” stretch and 30° rake; uses stock length XL front fork (31”), accepts a flat-side Fat Bob gas tank and uses a 5” or 6” rear fender
PART #2406-2611 has a 2” stretch in the backbone and 4” stretch in the down tubes with a 40° rake; requires a 12”-over (39”) front fork, does not have fuel tank mounts and uses a 5” or 6” rear fender
PART #2406-2612 has a 3” stretch in the backbone and 6” stretch in the down tubes with a 40° rake; requires 15”-over (42”) front fork, does not have fuel tank mounts and uses a 5” or 6” fender
Frames are all 1” tubing and include a 3/4” rear axle
Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive
Use PM or GMA rigid rear brake caliper kits
Will also accept XL forward controls or stock mid-controls and most exhaust systems
Frames will require neck post bearing cups, oil tank and battery box (must be purchased separately)

2406-2610

This item appears on page 899 of the Fatbook